Ключевые слова: composites, sol gel process, fabrication, YBCO, phase composition, X-ray diffraction, lattice parameter, sintering, phase formation
Ключевые слова: levitation performance, coils, design parameters, modeling, numerical analysis, ac losses
Ключевые слова: generators, hydraulic performances, levitation performance, MgB2, wires, coils, ac losses, eddy currents, torque, design, modeling, numerical analysis
Ключевые слова: HTS, YBCO, bulk, fabrication, infiltration process, precursors, doping effect, microstructure, composition, doping effect
Ono M., Wang Z., Zhai Y., Brown T., Maingi R., Menard J.E., Gryaznevich M., Kingham D., Kotschenreuther M., Mahajan S., Valanju P., El-Guebaly L., Boyer M., Canik J., Colling B., Raman R., Buxton P., Covele B., D’Angelo C., Davis A., Gerhardt S., Harb M., Hender T.C., Kaye S., Marriott E., Meier E.T., Mynsberge L., Neumeyer C., Park J.-K., Sabbagh S.A., Soukhanovskii V.10, Woolley R.
Ключевые слова: Tokamak, design, review, HTS, coils toroidal, aspect ratios, power supply, pilot-scale
Ключевые слова: HTS, YBCO, bulk, composites, infiltration process, fabrication, microstructure
Mumgaard R., Nygren R., Parker R., Poli F., Porkolab M., Reinke M.L., Rice J., Rognlien T., Rowan W., Shiraiwa S., Terry D., Theiler C., Titus P., Umansky M., Valanju P., Walk J., White A., Wilson J.R., Wright G., Zweben S.J., Labombard B., Marmar E., Irby J., Terry J.L., Vieira R., Wallace G., Whyte D.G., Wolfe S., Wukitch S., Baek S., Beck W., Bonoli P., Brunner D., Doody J., Ellis R., Ernst D., Fiore C., Freidberg J.P., Golfinopoulos T., Granetz R., Greenwald M., Hartwig Z.S., Hubbard A., Hughes J.W., Hutchinson I.H., Kessel C., Kotschenreuther M., Leccacorvi R., Lin Y., Lipschultz B., Mahajan S., Minervini J.
Ключевые слова: Tokamak, high field magnets, heating rates, divertor, review
Ключевые слова: HTS, YBCO, bulk, fabrication, powder processing, nanoparticles, nanoscaled effects, infiltration process, sintering
Ключевые слова: HTS, YBCO, bulk, fabrication, infiltration process, compression, microstructure, critical caracteristics, Jc/B curves, pinning force
Ключевые слова: HTS, YBCO, bulk, composites, fabrication, infiltration process, heat treatment, microstructure, size effect, doping effect
Ключевые слова: HTS, YBCO, bulk, composites, nanodoping, infiltration process, fabrication, microstructure, Jc/B curves
Ключевые слова: HTS, YBCO, bulk, fabrication, infiltration process, temperature distribution, critical caracteristics, Jc/B curves
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.